Peripheral Zone

A part of the room where greater heat output is necessary.

After clicking the Peripheral Zone icon, a list of functions will expand.

Create Peripheral Zone

Thanks to this function, the user could create zone with higher efficiency.

Steps to Create Peripheral Zone

1. Draw manually the detail line or curves as the dividing lines.
2. Click on the Peripheral Zone and then Create Peripheral Zone function on the ribbon.

3. Firstly, select the floor and then select the detail line or curves and click finish on the ribbon.

   

4. On the next step select main floor and click finish on the ribbon.

5. The floor has been divided into two parts. One of them will change the colour on dark green because the type of floor will be changed – from UFH_Standard_zone to UFH_Peripheral_zone.
6. Delete unused detail lines.

Assign Peripheral Zone

Thanks to this function, the user could assign peripheral zone to main floor.
This is not necessary when the user create peripheral zone using Create Peripheral Zone function (describe above).

The Assign Peripheral Zone function will be useful when a user split floor by Split Floor function and then he would like to change the type of one of them to peripheral zone. One of the floors created in this way will be the main zone and will have the UFH_Standard_zone type and the other will be the peripheral zone with UFH_Peripheral_zone type.

Steps to assign peripheral zone

1. Click on the Peripheral Zone and then Assign Peripheral Zone function on the ribbon.

2. Firstly, select the main floor and then select the peripheral zone and click finish on the ribbon.

   

3. The peripheral zone is assigned to main floor.